6-IN-1 Heat Shrink Tubing Expansion Line, 6 Expanders in 1 Line
6-IN-1 Heat Shrink Tubing Expansion Production Line, 6 Expanders in 1 LineCustomize your own Extruder& Expander for Heat Shrink Tubing 6-IN-1 Expansion Line can simultaneously expand each of 6 sizes or 6 tubes of one size up to 5mm Extruded Tubes to 2X sizes. WOLJIA can offer you the most suitable product solution based on […]
Solution for Heavy(Thick) Wall Heat Shrink Tubing Extrusion&Expansion Line
The process(extrusion and expansion) of producing heat shrink heavy wall tubing consists of three steps: extrusion, electron beam irradiation, and expansion. Heat Shrink Heavy Wall Tubing is produced through a process of extrusion, electron beam irradiation, and expansion. The process starts with extruding polyethylene into a tubular shape using an extruder. The tubing is then […]
What is the production process of heat shrink tubing?
The process of producing heat-shrinkable tubing consists of three steps: extrusion, electron beam irradiation, and expansion. For example, polyethylene is extruded into a tubular shape using an extruder and then cross-linked by a high-energy electron beam accelerator. Next, the cross-linked tube is softened in the heating zone and expanded radially by internal pressure or other means, […]
One out of Three Expansion Machine for Heat Shrink Tubing
Customize your own Extruder& Expander for Heat Shrink Tubing. This kind of Expander can expand each of 3 sizes or 3 tubes of one size simultaneously.
